440 found, showing page 8 of 11
$23.99
250PC 2" TAN FRAME SCREW
Hardened steel screw with a 1/4 In. hex head drive for quick, no slip installation. For attaching metal roofing and siding to wood framing. The long life finish on the colored screw is a 3 step process beginning with a galvanized plating and then an oxy seal is applied to protect the screw and the various metal surfaces from metallurgic reaction. The final coating (except for the galvanized screw) is the paint itself, color match finish. Preassembled with Neoprene washer for a weather tight seal. Seals the hole that is driven.
View Details
10x1/2" SCREW,DRILL PPH
Phillips, pan head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. 100-piece pack.
View Details
$16.99
*8x1-1/2" SCREW,DRILL PPH
Phillips, pan head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. 100-piece pack.
View Details
$13.99
*8x1" SCREW,DRILL PPH
Phillips, pan head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. 100-piece pack.
View Details
$21.49
*10x1-1/4" SCRW,DRL HWH
Hex washer head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. Zinc. 100-piece pack.
View Details
8x1-1/2" SCRW,DRL HWH
Hex washer head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. Zinc. 100-piece pack.
View Details
10x3/4" SCREW,DRILL PPH
Phillips, pan head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. 100-piece pack.
View Details
1/4-14X3/4 HWH DRL SCREW
Hex washer head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. Zinc. 100-piece pack.
View Details
12-14X2 HWH DRL SCREW
Hex washer head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. Zinc. 100-piece pack.
View Details
12-14x1-1/2HWH DRL SCREW
Hex washer head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. Zinc. 100-piece pack.
View Details
12-14x1 HWH DRL SCREW
Hex washer head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. Zinc. 100-piece pack.
View Details
10x1-1/2" SCRW,DRL HWH
Hex washer head sheet metal screws. Self-drilling points that drill, tap, and fasten in 1 operation. Good for attaching almost any type of material to metal. Zinc. 100-piece pack.
View Details
1/4x2 HEX LAG SCREW
Steel zinc screw with a hex head and gimlet point. Use for wood with non-corrosive environments.
View Details
5/16x3 HEX LAG SCREW
Steel zinc screw with a hex head and gimlet point. Use for wood with non-corrosive environments.
View Details
5/16"x3-1/2" HEX LAG SCREW
Steel zinc screw with a hex head and gimlet point. Use for wood with non-corrosive environments.
View Details
5/16x4 HEX LAG SCREW
Steel zinc screw with a hex head and gimlet point. Use for wood with non-corrosive environments.
View Details
*5/16X6 HEX LAG SCREW
Steel zinc screw with a hex head and gimlet point. Use for wood with non-corrosive environments.
View Details
3/8'x 2" LAG SCREW
Steel zinc screw with a hex head and gimlet point. Use for wood with non-corrosive environments.
View Details
3/8X3 HEX LAG SCREW
Steel zinc screw with a hex head and gimlet point. Use for wood with non-corrosive environments.
View Details
8x2-1/2 PAN HD METAL SCREW
Pan head Phillips sheet metal screw. Zinc plated. 100-pieces per package.
View Details
$18.99
10X2-1/2 PAN HD METAL SCREW
Pan head Phillips sheet metal screw. Zinc plated. 100-pieces per package.
View Details
1/4x6 HEX LAG SCREW
Steel zinc screw with a hex head and gimlet point. Use for wood with non-corrosive environments.
View Details
$15.99
185PC 9X1-1/4 BACKER-ON
Gimlet point. No. 2 star drive prevents bit from slipping. Special ribs under the head countersink into material for flush seating. Serrated thread design reduces installation torque and provides superior holding power. Corrosion-resistantfinish prevents unsightly rust from bleeding into tile. Specifically designed and recommended for use with fiber cementbackerboard. Common applications: Bathtub/shower, countertops, floors, sink blacksplash.
View Details
$17.49
140PC 9X1-5/8 BACKER-ON
Gimlet point. No. 2 star drive prevents bit from slipping. Special ribs under the head countersink into material for flush seating. Serrated thread design reduces installation torque and provides superior holding power. Corrosion-resistant finish prevents unsightly rust from bleeding into tile. Specifically designed and recommended for use with fiber cement backerboard. Common applications: Bathtub/shower, countertops, floors, sink blacksplash.
View Details
$11.99
*1LB 6X1-5/8 TRIM SCREW
Finish screw for fastening of base or trim through drywall to light-gauge metal or wood studs. Square drive. 1 lb. box.
View Details
$11.99
*1LB 6X2-1/4 TRIM SCREW
Finish screw for fastening of base or trim through drywall to light-gauge metal or wood studs. Square drive. 1 lb. box.
View Details
$8.49
1LB 6x1-1/4 SDR DW SCREW
Bugle head, No. 2 Phillips drive. #6 fine thread, self-drill point. For attaching gypsum board to light gauge steel. Also suitable for wood and plastic applications. This screw is constructed of hardened steel which is the result of carbon steel being put through heat treatment, quenching, and further reheating making it extremely durable. Hardened Steel is more resistant to wear, corrosion, and abrasion. 1 lb box.
View Details
$8.49
*SCREW 6X1-5/8DRIL
Bugle head, No. 2 Phillips drive. #6 fine thread, self-drill point. For attaching gypsum board to light gauge steel. Also suitable for wood and plastic applications. This screw is constructed of hardened steel which is the result of carbon steel being put through heat treatment, quenching, and further reheating making it extremely durable. Hardened Steel is more resistant to wear, corrosion, and abrasion. 1 lb box.
View Details
8M 1-1/4 DYRWALL SCREW
Bugle head, Phillips recess, drill point drywall screw. Recommended for the application of drywall or gypsum board to 10-12 gauge metal studs. Recommended maximum drive speed of 2500 RPM. This screw is constructed of hardened steel which is the result of carbon steel being put through heat treatment, quenching, and further reheating making it extremely durable. Hardened Steel is more resistant to wear, corrosion, and abrasion.
View Details
5M 1-5/8 DRYWALL SCREW
Bugle head, Phillips recess, drill point drywall screw. Recommended for the application of drywall or gypsum board to 10-12 gauge metal studs. Recommended maximum drive speed of 2500 RPM. This screw is constructed of hardened steel which is the result of carbon steel being put through heat treatment, quenching, and further reheating making it extremely durable. Hardened Steel is more resistant to wear, corrosion, and abrasion.
View Details
3/16x3-3/4" PHILLIP TAPCON 75PK
Concrete screw anchors. Flat Phillips. 100-pieces per pack. Carbide bit included.
View Details
$59.99
1/4X3-3/4 HX WSHR TAPPER
RAWL brand. Concrete screw anchors. Hex washer head. 100-pieces per pack. Carbide bit included. Ceramic-coated. ACQ approved.
View Details
$15.99
*5LB 6X1-1/4" CRS DRYWALL SCREW
Can be used for drywall, hardware, plywood, composition, and softwood. Sharp point, coarse thread with a No. 2 Phillips recess, bugle head. Phosphate finish. For interior use. This screw is constructed of hardened steel which is the result of carbon steel being put through heat treatment, quenching, and further reheating making it extremely durable. Hardened Steel is more resistant to wear, corrosion, and abrasion.
View Details
$15.99
6x1-5/8" CRS DRYWALL SCREW 5lb
Can be used for drywall, hardware, plywood, composition, and softwood. Sharp point, coarse thread with a No. 2 Phillips recess, bugle head. Phosphate finish. For interior use. This screw is constructed of hardened steel which is the result of carbon steel being put through heat treatment, quenching, and further reheating making it extremely durable. Hardened Steel is more resistant to wear, corrosion, and abrasion.
View Details
$21.99
4LB 8X2-1/2 CRS DRYWALL
4LB 8X2-1/2 CRS DRYWALL
View Details
$7.19
5/32X4-1/2 DRILL BIT
Ensures precise drilling of pilot holes when installing Tapcon anchors. Masonry drill bit with carbide tip. For installing 3/16" Tapcon fasteners, use 5/32" tapcon drill bit. For installing 1/4" Tapcon fasteners, use 3/16" Tapcon drill bit.
View Details
$42.99
TAPCON PRO INSTALL KIT
The Tapcon Pro Installation Kit is a power tool attachment used to install Tapcon concrete anchors. Compatible with hammer drills, rotary hammer drills and impact drivers, the Tapcon Pro Installation Kit allows fast change from drilling to driving and eliminates the need for 2 drills, extra nut drivers or Phillips bits. The kit includes drive sleeve, smooth shank adapter, #2 & #3 Phillips head bits, (2) magnetic recessed hex drivers, and carrying pouch.
View Details
$15.99
5LB 6X1" DRYWALL SCREW
Can be used for drywall, hardware, plywood, composition, and softwood. Sharp point, coarse thread with a No. 2 Phillips recess, bugle head. Phosphate finish. For interior use. This screw is constructed of hardened steel which is the result of carbon steel being put through heat treatment, quenching, and further reheating making it extremely durable. Hardened Steel is more resistant to wear, corrosion, and abrasion.
View Details
$46.99
1/4X3-1/4 FH PHL TAPPER
Concrete screw anchors. Flat Phillips. 100-pieces per pack. Carbide bit included.
View Details
$0.15
8X2-1/2 CAB SCREW
Cabinet screws with flat heads are chosen for their lack of head height, making them ideal to use where a protruding head is unacceptable. Makes driving faster, more centered, prevents splitting, and increases grip in material. Flat Phillips twin thread. 100-piece pack.
View Details
